Synthetic & Flat Web Sling Op.

The Synthetic & Flat Web Sling Operating Procedure (SOP-LFT-003) details critical safety measures and best practices for using synthetic web slings in various work environments. It addresses hazards such as sling failure, cut damage, UV degradation, and more, ensuring compliance with relevant WHS legislation. This document is essential for operators and supervisors in industries using lifting equipment, helping prevent accidents and ensuring safe handling of loads.

• Sling failure and load drop → fatality from crush or struck-by
• Cut damage to webbing from sharp edges → catastrophic failure
• UV degradation of polyester from extended outdoor storage
• Chemical attack (acids, bleach, solvents) on polyester or polyamide
• Heat damage from welding, hot loads, or friction
• Concealed damage in round-slings (only visible by core-yarn inspection)
• Use beyond WLL or at insufficient sling angle
• Slipping of choke hitch on smooth, polished, or angular loads

• Work Health and Safety Act 2011 (Cth) and applicable state/territory WHS legislation
• Work Health and Safety Regulation 2011 (Cth) — Part 5.1 High Risk Work; Part 3.1 Plant
• AS 1353.1 — Flat synthetic-webbing slings — Product specification
• AS 1353.2 — Flat synthetic-webbing slings — Care and use
• AS 4497 — Round slings — Synthetic fibre
• AS 2550 series — Cranes, hoists and winches — Safe use
• Safe Work Australia — Code of Practice: Managing the Risks of Plant in the Workplace
• Synthetic Sling Inspection Register (associated document)