Vibrating Drum Roller Op.

This Standard Operating Procedure (SOP-CPT-006) outlines critical safety guidelines for the operation of vibrating drum rollers. It addresses various hazards including tip-over risks, run-over incidents, and vibration exposure, ensuring operators are informed and protected. Compliance with this document is essential for construction teams and safety officers to meet regulatory standards and safeguard workers' health and safety.

• Roller tip-over on slopes, soft edges, or trench-side compaction → fatality
• Run-over of bystanders, particularly on tight rear-vision tandem units → fatality
• Hand-arm vibration syndrome (HAVS) on walk-behind operation
• Whole-body vibration on ride-on units
• Crush injuries between drum and structure
• Noise exposure exceeding 85 dB(A)
• Fume and dust inhalation
• Engine fire from hot exhaust contact with debris

• Work Health and Safety Act 2011 (Cth) and applicable state/territory WHS legislation
• Work Health and Safety Regulation 2011 (Cth) — Part 3.1 Plant
• AS 1742 series — Manual of uniform traffic control devices
• AS 4024.1 series — Safety of machinery
• Safe Work Australia — Code of Practice: Managing the Risks of Plant in the Workplace
• Safe Work Australia — Code of Practice: Managing Noise and Preventing Hearing Loss at Work
• Safe Work Australia — Guide to Managing the Risks of Hand-Arm Vibration
• Vibrating Drum Roller Pre-Start Checklist (associated document)