Concrete Pump Operation (Including Pre-Operational Inspection and Shutdown Procedure)

The SWMS-CON-001 Concrete Pump document provides a comprehensive safety framework for managing the hazards associated with concrete pumping operations. It covers critical hazards such as tip-over, mechanical failures, chemical burns, and environmental risks. This document is essential for site managers, safety officers, and workers involved in concrete pumping to ensure compliance with Australian safety regulations and to promote a safe work environment.

• Tip-over from outrigger failure; overhead contact
• Mechanical / hydraulic defect; line failure
• Tip-over; struck-by boom
• Pipeline burst from priming surge
• End-hose whip; pipeline burst; entrapment of placement crew
• Burns from alkaline cement; allergic dermatitis
• Pressure release / pipe rupture
• Sponge-ball ejection; alkaline wastewater
• Inadvertent boom movement; overweight on road
• Chemical burn
• Mass casualty
• Soil / water contamination; air quality
• Drift

• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• AS 5804
• AS 2550.15
• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• AS 2550.15
• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• AS 2550.15
• WHS Reg 2017 Ch 7
• AS 1715/1716
• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• AS 2550.15
• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• EPA Act
• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• Heavy Vehicle National Law
• WHS Reg 2017 Ch 7
• WHS Act 2011
• WHS Regulation 2017
• WHS Reg 2017 Pt 5.1
• AS 2550.15
• Code of Practice: Concrete pumping
• EPA Act
• POEO Act
• WHS Reg 2017 Sch 18 (HRCW)
• Code of Practice: Construction work