SWMSConstruction

Crane Loading Platform Operation (Including Pre-Operational Inspection and Shutdown Procedure)

SWMS-CRN-011

About this Document

The SWMS-CRN-011 Crane Loading Platform document outlines critical safety measures for crane loading operations, addressing hazards such as inadequate lift planning, unlicensed operation, and mechanical failures. It is essential for construction managers, site supervisors, and operators to comply with safety regulations. This document promotes a safer workplace by providing detailed procedures to mitigate risks associated with crane operations.

Hazards & Risks Covered

  • Inadequate lift planning — overload, instability, incorrect rigging
  • Unlicensed operation; incompetent rigging or dogging
  • Struck-by load/counterweight; powerline contact during slew/luffing
  • Falls from height; structural failure during climb
  • Mechanical / structural / wire-rope defect not detected
  • Sling failure; shock loading; under-rated rigging
  • Load swing; struck-by; pinch point
  • Imbalance, overload of one crane loading platform
  • Fall from platform; load drop onto platform
  • Loss of control of load; crane sway
  • Inadvertent movement; theft; storm damage
  • Mass casualty event
  • Crane Loading Platform energised
  • Soil/water contamination; community complaint
  • Drift from documented method; SWMS not followed

Legislation & Codes of Practice

  • WHS Reg 2017 Part 5.1
  • AS 2550.1
  • AS 2550.5
  • AS 1418 series
  • WHS Reg 2017 Sch 18 (HRCW)
  • Code of Practice: Construction work
  • AS 2550.1
  • AS 5804
  • WHS Reg 2017 Pt 4.7
  • AS/NZS 3000
  • AS/NZS 3012
  • AS/NZS 3760
  • WHS Reg 2017 Part 5.1
  • AS 2550.1
  • AS 2550.5
  • AS 1418 series
  • WHS Reg 2017 Pt 4.4
  • AS/NZS 1891.1
  • AS 2550.10
  • AS 1657
  • AS 2759
  • AS 2550.1
  • AS 2550.1
  • AS 1353
  • AS 3775
  • AS 4497
  • WHS Reg 2017 Part 5.1
  • AS 2550.1
  • AS 2550.5
  • AS 1418 series
  • WHS Reg 2017 Part 5.1
  • AS 2550.1
  • AS 2550.5
  • AS 1418 series
  • AS 2550.5
  • AS 1418.4
  • WHS Reg 2017 Pt 4.4
  • AS/NZS 1891.1
  • AS 2550.10
  • AS 1657
  • WHS Reg 2017 Part 5.1
  • AS 2550.1
  • AS 2550.5
  • AS 1418 series
  • WHS Reg 2017 Part 5.1
  • AS 2550.1
  • AS 2550.5
  • AS 1418 series
  • WHS Act 2011
  • WHS Regulation 2017
  • WHS Reg 2017 Part 5.1
  • AS 2550.1
  • AS 2550.5
  • AS 1418 series
  • AS 5804
  • WHS Reg 2017 Pt 4.7
  • AS/NZS 3000
  • AS/NZS 3012
  • AS/NZS 3760
  • EPA state Acts
  • AS 1940
  • WHS Reg 2017 Sch 18 (HRCW)
  • Code of Practice: Construction work

What You Receive

PDFPersonalised PDF

Included SOP Documents

Free with this SWMS

SWMS + Included SOPs

$29.95AUD
  • Personalised PDF document
  • Instant download after purchase
  • Auto-populated with your company details
  • 1 SOP included free — SOP-CRN-011
Cornerstone SWMS

Professional SWMS and SOP documents for Australian workplaces. Professionally drafted, editable, and instantly downloadable.

Legislation & Standards

  • Work Health and Safety Act 2011 (Cwlth)
  • State & Territory WHS Legislation
  • Safe Work Australia Guidelines

Disclaimer: All documents provided on this platform are templates and starting points only. They must be reviewed, adapted, and approved by the Person Conducting a Business or Undertaking (PCBU) or facilitated by a designated WHS Manager, Site Supervisor, or Principal Contractor, before use at any specific worksite. Site-specific hazards, conditions, and legislative requirements may vary. Cornerstone SWMS accepts no liability for documents used without appropriate review and customisation.

© 2026 Cornerstone SWMS. All rights reserved.